Description: The kit contains all required parts for repair of the upper door and lower hinges to regain the original structural integrity. The advantage to this kit is that you do not have to remove the old hinges, or adjust door alignment. All you need to do is remove the old worn pins and bushings and install the kit (typically no more than a two hour job). Each kit will repair one Fourth Gen (1993-2002) F-Body door.  The hinge pins in this kit have a Zerk fitting to attach a grease gun and grease the interface between hinge pin and bushing. 

Kit Contents: (4) CNC machined 1045 steel pins, electroless nickel plated for improved lubricity and corrosion protection. (4) CNC machined brass bushings, (4) Aerospace 12 point high tensile nuts, (2) 0.5ml packets of Loctite 271 bearing retaining adhesive, (2) 6" strip of special abrasive, instructions. 

Recommended Tooling:

TDS 300350 EZ-Store Door Alignment Tool

TDS 301120 GM Door Hinge Spring Tool. The tool helps to remove or install the lower door hinge spring.

TDS 303120 5 Pc. Long Pin-Punch Set. This tool helps to push out the hinge pins once you've ground off the heads.